Garage Door Remotes Archives | Your Garage Door Guys

Keyless entry options for your garage door are a great invention. You’ll never have to get out of your car in the rain or snow again, just to open the door.

With a few presses of a button, you’ll be indoors where it’s warm and dry. However, sometimes you’ll need to change the code or use a new remote, and that’s where things get difficult. Maybe you forgot the code, or you moved into a new home and don’t have the code.

In this article, we’ll show you how to reset clicker garage door keypad without code.

Getting Started

You’re stuck outside of your garage, and you need to know how to reset clicker garage door keypad without code. What do you do? Luckily, it’s quite simple to do.

You’ll need to get into your garage and reach the motor unit of the opener. This is usually located up high, so get a ladder to enable you to reach it. Once you’ve done this, locate the ‘learn’ button, usually located on the side of the unit. Hold the button until the light on the unit goes out. This indicates that the unit has forgotten the old code.

Once you’ve done this, you’ll need to press the ‘learn’ button again. This should bring the light on again. Once this has happened, go to the keypad and enter the code you want to use for the door from now on. The motor unit’s light should blink, to show it has accepted the new code.

Press the ‘learn’ button once more, and press a button on your remote. Once you’ve done this, the door should open for you. Repeat this step with all other remotes in the home, to ensure they can all open the door.

Here’s how to reset clicker garage door keypad without code …

How to Reset Clicker Garage Door Keypad Without Code

If you don’t have a keypad on your garage door, you can still reset the code so you can get into your garage. Take your remote and remove the cover, so you can see the inside of it. You’ll see there are some switches inside it that dictate the code that’s used to open your garage door. Move them as needed to create a new code. Make sure you do this for all of your garage door remotes.

Once you’ve done this, look at the garage door opener unit in your garage. There will be switches on this that will match the switches in the remote. Move these so these match the new codes in the remotes, and replace the covers back onto anything that you removed.

Once you’ve done this, test your remotes to see if they work. If they did, the door should open and close as normal.

Rolling Codes

If you have an older garage door and are worried about security in your home, you should look into getting a newer opener with rolling codes. These are the most modern way of using garage door openers and are a good way of keeping your garage safe.

These codes are ‘rolling’ as every time you press the button on your remote in order to get in, your opener will ‘roll’ the codes. This means the codes will change every time you use it. Because of this, only your remote should work on the door. This stops anyone from coming within the distance of your door and trying to capture the codes themselves.

Other Garage Door Opening Options

If you don’t want to worry about clickers for your garage door, you could look into getting a keypad for entry. These sit by the side of the door and require the correct code to be put in before the garage door will open. These are perfect if you’re worried about security, as they can only be opened by someone who knows the code. You also won’t have to worry about finding your clicker when you come home. As long as you know the code, you’ll be able to get in.

Keypads are also great for children, as it gives them a safe way of opening the garage door without having to give them keys. If you’re worried about them losing keys to your home, a keypad is a great way around this.

Common Garage Door Opener Repairs

Having to reset your clicker is one thing that you may have to do when you move to a new home or have problems with your opener. Here are some other issues you may have with your opener, and how you can easily fix them.

The door keeps auto-reversing: Is your door auto-reversing when you’re trying to close it? It could be that there’s something blocking the photo-eye. These eyes sit at either side of the door near the ground, and they can easily get blocked, knocked out of place, and covered in dirt. Realign your photo eyes and clean them off, and your door should start working again.

Remote won’t work: There are several reasons why your remote won’t work. Firstly and most commonly, you’ll see that the batteries have died, so they’ll just need to be changed out. If the contacts have corroded, you can polish them in order to make them work again. Sometimes you’ll find the door has been locked manually, so check for that too.

The door opens when you don’t want it to: Are you getting the opposite problem, that your garage door is opening and closing seemingly on its own? There’s actually a simple explanation. A neighbor’s garage door opener is probably on the same frequency, and when they hit their remote it’s opening your door. Talk to your neighbors to see what’s causing this.

It’s actually very simple to reset the code on the garage door clicker when you don’t have the existing code. As long as you have access to the garage door opener motor, you can change it. It’s an easy process and once it’s done you’ll be able to get in and out of your garage with ease.

Liftmaster remote not working?

We hear from customers every now and then who have discovered their remote doesn’t seem to be working properly. Fortunately, there are a few simple reasons that might be causing this problem.

In this article, you will discover 4 common problems that may prevent your Liftmaster remote from working properly.

Let’s get started.

Liftmaster Remote Not Working!

Before you can go about fixing your garage door remote, you’ll need to know how it works in the first place. Your remote is a radio transmitter. Most modern garage door remotes transmit at 315 MHz. When you press the button on your remote, the opener on your garage door receives it. It’ll then start the motor running that opens your garage door.

Modern remotes transmit a binary number to your garage door opener. This number is unique every time you use the garage door. When you press the button, the opener ‘listens’ for the correct number that works on your door. If it hears the right one, it will open. Once the door has opened, the system will reset and a new number will be generated.

This came about as in the early days of garage door openers, the door could be opened with any remote. Of course, this presented a security risk, so the number generating system was put in place to keep your garage safe.

Common Reasons Remotes Don’t Work

So you drive up to your garage door, press the button on your remote, and nothing happens. What’s going on? There are several reasons why the remote isn’t working, so there’s no need to panic.

Here’s what you should check for when the door won’t open:

1. Remote batteries – Try changing the batteries

The most common reason your remote isn’t working is simply that the batteries have worn out. These days, you’ll get thousands of openings off your one set of batteries, but eventually, those batteries will just run out. You’ll need to try replacing the batteries and trying the remote again. In most cases, you’ll see that the garage door starts opening again.

On the subject of batteries, the type that you use in the remote is important. Many people like to use rechargeable batteries, in order to reduce waste. This is a good idea in theory, but the problem is these types of batteries don’t put out enough power. You’ll want to use good name brand batteries to ensure you get the most use out of them.

2. Remote battery contacts – Make sure the contacts aren’t damaged

The battery contacts inside your remote are what transmit the power from the battery to the remote itself. Over time, these get worn and damaged, so you want to keep an eye on it. Take a look at your contacts. Are the dirty, worn, or discolored? If they are, then you’ll need to clean and polish them before they’ll work again.

To do this, dry the contacts with a clean cloth, and then polish them with a fine-grit sandpaper. This will take any dirt and discoloration off, allowing them to connect the battery power to the remote again.

3. Remote eye – Clean the lens of your remote

The eye on your remote is what transmits the signal to your garage door opener. It’s not uncommon for remote lenses to gather dirt over time, so be sure to clean this area every now and then to ensure the signal can travel properly.

This is another simple problem to solve. Take a soft damp cloth and wipe away any dirt that’s accumulated on the eye. This should solve most problems. In more extreme cases, the plastic that houses the eye becomes pitted and scratched, and if that gets too bad you won’t be able to clean that off. In these cases, you’ll need to buy a new remote.

4. Remote reset – Try resetting the remote with your opener

In some cases, you’ll need to reset the opener and the remote, in order to get them to work. They’re both small computers, and sometimes the circuit boards in them need to be rebooted in order to work properly.

To do this with your remote, all you need to do is remove the batteries for about 30 seconds. To reboot the opener, unplug the unit from the wall for about 30 seconds, and then plug it back in. This will get the system to reset itself. Try the remote again once you have completed both of these steps, and see if it’s working now.

What If It Still Doesn’t Work?

So you’ve followed these steps, and your remote still isn’t opening the garage door. What do you do now? It may be that the remote itself isn’t functioning properly, and so you’ll need a new one. New remotes aren’t too hard to buy, and they don’t cost much either. It’s worth buying a new one, programming it to work with your opener, and trying that. In many cases, this will fix the problem.

If this still doesn’t work, then it may not be a problem with your opener at all. The opener mechanic may have a fault, where it doesn’t receive the signal your remote is putting out. It may also be that the mechanics of the door aren’t working, and so your opener is sending the signal to open, but the door can’t. Whatever the problem is, you’ll need to call in a repair professional to handle it for you. They’ll examine the door and see what’s causing the issue.

If your Liftmaster remote isn’t working, there’s no need to panic. You can troubleshoot it yourself quickly and easily, and in most cases get it working again. If it doesn’t call on a professional to take a look and fix it for you. Soon you’ll have your garage door working again.

If you’re unable to resolve the problem, you may need to contact a professional garage door service near you for help. If you’re in the Ventura County or Los Angeles County area, contact Your Garage Door Guys for an estimate. One of our friendly professionals will visit you at your convenience and assess the problem.