Categories
Garage Door Openers

How to Open an Automatic Garage Door Manually

The joy of an automatic garage door is that normally, you’ll never have to open it manually at all. You’ll be able to open and close it just with the touch of a button. You won’t even need to get out of your car, so you can just drive right in. it’s wonderful in the colder months when rain or snow makes it unpleasant to be outdoors.

In this article, we’re exploring how to open an automatic garage door manually.

How to Open an Automatic Garage Door Manually

Sometimes though, you will need to open that garage door yourself without the remote.

In some cases, you may have lost the remote and need to get the door open. Perhaps there’s been a power failure, so you can’t get the garage door open in the usual way. Luckily, there is a manual opening feature on all automatic garage doors. Here’s how to open an automatic garage door manually.

Here’s how to open an automatic garage door manually.

A Warning Before You Open Your Garage Door

If you’re using these tips on how to open an automatic garage door manually, ensure you only do so when the door is fully closed. If your door is stuck open, you don’t want to try and get it moving manually. This is because as you do so, the door can come crashing down. It’s going to hit anything in it’s path, including your car or even anyone who happens to be standing near it. If the door is stuck open, it’s a much better idea to call a garage door engineer to take care of it for you.

How to Manually Open Your Garage Door

Ok, so the door is stuck closed as there’s no power or you’ve lost the remote. What do you do? Here’s how to open an automatic garage door manually:

1. Find The Cord

Most garage doors are going to have an emergency manual opening device somewhere on them. It’s usually located on a bracket on the chain. It’ll be easy to find, as in most cases it’s a red cord. If you only have one cord but it isn’t red, it’s most likely going to be what you need. If you’re not sure, check the manufacturer’s guide. Place a ladder underneath it so you can reach it.

2. Pull-On The Lever

Next, you need to pull on the lever. Before you do this, ensure that nothing is in the opening path of the garage door, to ensure that no damage or injury occurs. As you pull on the cord, you should see that it’s attached to a small lever. This lever is spring-loaded and should lock in the down position once you pull on it. Once you’ve done this, come down from the ladder.

3. Lift The Garage Door

Now that you’ve pulled the release cord, you’re ready to lift the garage door open. It’s a good idea to have another person with you for this step, so they can help you. The door should lift as you pull it up. If you’re finding that the door won’t budge, then you’ll need to pull on the cord again until it totally locks into place.

4. Keeping The Door Open

Once you have the door open, it’s important that you don’t let it go. When the garage door opener is working, it will keep it on the tracks so it doesn’t come down. However, at the moment it is free on the tracks. If you were to let go of it, it would just slide back down. Therefore, this isn’t a long term solution to getting the garage door open.

At this point, use something to prop the garage door open. Using a 2 by 4 is helpful, or having someone hold the door open as you drive your car in or out. Ensure you don’t leave the garage door open, as this is a safety issue.

5. Lock The Garage Door Again

Once you’re done moving your car, you’ll need to shut and lock the garage door again. Ease the garage door down by hand, until it’s in place again. Again, get your ladder and pull on the cord. This time, the lever it’s attached to should move back up, sliding the bracket back into the chain bracket. This will enable the door to be opened automatically again once you have the ability to do so.

If you have power, test the remote to check that the bracket is fully locked. If the chain is moving but the door isn’t opening, it hasn’t been locked into place fully. Pull the cord again until you feel it lock back into place.

What to Do if Opener Isn’t Working?

If you’ve used all these tips on how to open an automatic garage door manually, because you can’t get your opener to work, there could be several different issues at play. Take a look for the following:

Batteries: Are the batteries in the remote working? Try a new set of batteries to see if that works. If not, try polishing the contacts as corrosion can stop the remote working.

Springs: Check the torsion springs on the door. Are they broken? If they are, don’t try and replace them yourself. We highly we commend contacting a professional for help replacing garage door springs, as springs can be dangerous if not properly handled.

Disconnect Cord: It could be that the cord has already been pulled, stopping the door from opening automatically. Check to see if the lever on the cord has been pulled down, and reconnect it if it has.

Power Source: It could just be that the garage door opener has been unplugged. This happens all the time, so check your opener to see if it has been unplugged.

Cables: The cables that pull your garage door may have snapped or come loose. Much like springs, they are dangerous to handle alone. If you see a snapped cable, call an expert to help you.

It’s actually easier than you’d think on how to open an automatic garage door manually, even if you can’t do it automatically. Have someone to help you, and you’ll be able to get your car in and out in no time at all. If you’re having more problems with your garage door, call on an engineer to help you out and you’ll have it working again in no time.

Categories
Garage Door Openers

When to Replace Garage Door Opener (6 Signs)

Knowing when to replace a garage door opener is key to keeping your garage operating safely. If you’re like most people, you’re probably not too familiar with how your garage door opener works, so we thought it might be helpful to share a few signs that your opener needs repair or replacement.

In this article, we’re taking a closer look at when to replace a garage door opener.

When to Replace Garage Door Opener

Your garage door opener does so much work for you.

It opens and closes the garage door for you whenever you need it, so you don’t have to get out of your car. It’s the perfect thing when it’s raining or snowing out, so you won’t have to worry about getting cold and wet. When the opener breaks though, you’re left in a tight spot. When should you replace your garage door opener?

Here are a few signs to watch for if you want to know when to replace garage door opener.

Check Your Door First

If you suspect your garage door opener isn’t working, you’ll need to test it first. Detach the garage door opener, and open the door manually. If it holds itself in position by itself, then the door is fine and the garage door opener will need to be looked at.

If there’s an issue with the door though, you’ll see that the door slides back down its tracks. This is because the springs that give it the tension it needs to open are wearing out. Springs are strong, but over so many cycles they will begin to wear out. If you leave them, you’ll see that they can even break, which is highly dangerous.

If you find the springs are worn, call on an expert to come and take a look at them for you. They will be able to ensure that the springs are replaced safely, getting your door opening and closing again smoothly.

Signs Your Garage Door Opener Is Wearing Out

A garage door opener is a mechanical piece of equipment, so when it’s well taken care of it will last for years. Even the best-kept opener will eventually wear out though. Here are the signs to look out for.

1. Loud Noises

Normally your garage door opener would work quietly, and you’d be able to get in and out without a problem. Now though, you’re noticing all kinds of noises. Loud screeching, creaking or squealing are signs that the garage door opener is wearing out. The noise usually comes from chain drives as they age or come loose.

Be aware, these sounds could also be a signal that your garage door is coming off its tracks. Check for this before you replace the garage door. It’s a simple fix and could solve the issue you’re having. Plus, if you leave it long enough it can do real damage to your garage door.

2. Slow Movement Or Detaching

Over time, you’ll see the garage door opener getting slower. That’s a sign that it’s aging and getting ready to give up the ghost. It may also hesitate before it starts opening.

You also need to keep an eye out for detaching. That’s when the opener disconnects, sending the garage door to the floor. That’s a serious danger, especially if you have any children or pets around. If you see this happening, you’ll need to replace the garage door opener as soon as possible.

3. Vibration

This is something you’ll see, rather than hear.

The garage door opener will vibrate in its housing as it ages, usually due to bent shafts or worn out armatures. If this is allowed to go on long enough, it’ll shake the chain free from the housing, causing a detachment. You don’t want this to happen when your car is under the door, or worse, one of your children.

4. Random Opening And Closing

Are you noticing that the garage door opens and shuts at odd times? That’s a sign that the electronics are wearing out in your opener. If you see this happening, you may well need to get the opener replaced.

Before you do so, check for a couple of other issues. Firstly, ensure that your garage door’s opener isn’t picking up the frequency of someone else’s remote. Talk to your neighbors and see if they’re having issues. If they are, you’ll need to reprogram the opener. Also, look to see that the photo eyes on either side of your garage door aren’t blocked or broken. Taking care of them is an easy fix too, so ensure you’re checking for it.

Related: Garage Door Opener Remote Programming

5. Intermittent Working

This is quite a clear sign that something is wrong with your garage door opener.

You’ll click the button on the remote once, and nothing will happen. Click it again, and you’ll see that it finally connects and works. If that’s happening and your troubleshooting isn’t fixing it, it’s time to get it repaired.

Benefits Of Replacing Your Garage Door Opener

Once you’ve decided to update your garage door opener, you’ll be able to reap the benefits of a new model. For example, if you’re replacing a quite old model, your new one will use rolling codes. These ensure that a new code is generated between the remote and the opener every time it’s used. This keeps your home more secure, as no one will be able to copy the codes if they’re close by.

You can also choose to upgrade to a smart garage door opener. These are great, as they allow you to open the door remotely. Anyone who’s allowed access to the door can operate it from their phone, which saves you the hassle of programming extra remotes. It’s also great for deliveries, as you can open the door for them without having to be there yourself.

Conclusion

There are several ways you’ll know that the garage door needs to be replaced. If you see the opener vibrating, hear loud noises, or only get it working half the time, it’s time to upgrade to a newer model. Keep an eye on your garage door opener to ensure it’s in the best working condition.

If you’re looking for a professional garage door service provider, check out Your Garage Door Guys for professional garage door services in your area.

Categories
Garage Door Openers

How to Replace Battery In Overhead Garage Door Opener

If you discover your garage door opener isn’t opening or closing when you trigger the remote, it may be time to change the batteries.

In this article, we’re exploring how to replace battery in overhead garage door opener so you know what to do if you find yourself in this situation.

Let’s get started.

How to Replace Battery In Overhead Garage Door Opener

In order to understand how to replace battery in overhead garage door opener, you need to know a few things about your garage door and opener.

If you suspect the batteries in your overhead garage door opener are dead, then it’s easy to find out for sure. On the control panel, there’s going to be a battery compartment on the bottom of it. On some models, the door will slide off to reveal the batteries, while others may need to be unscrewed to open up.

Get the compartment open, and take out the old batteries. Replace them with some fresh ones, ensuring that they’re placed in the right way. Most modern battery compartments will have the correct placement stamped into them, so check this before you go ahead and do it. Test your garage door opener now. If the door works, then you’re good to go.

If you use a garage door remote and the door still isn’t opening, then it may be the batteries in the remote that are dead. Repeat the same process for the remote, taking out the old batteries and replacing them with new ones. Check again and see if your door is opening.

If Replacing Batteries Doesn’t Work

 Have you tried replacing the batteries, and the door still won’t open?

Don’t panic, there could be a number of reasons why this is happening. Even better, many of them can be solved by yourself, without having to call for help.

Here’s why the door may not be opening …

Make sure the opener has power

This sounds so obvious, but it’s so obvious that many homeowners don’t even think to check. Surely the door opener is plugged in? The fact is, it could have been pulled out by someone else, or it was tripped over and pulled loose without anyone realizing it. Check the plug and ensure it’s fully plugged in, and try the door again.

Check your breaker panel

The next step is to go find your breaker panel and see if the circuit for your garage has been tripped. It’s so easy for a small power surge to trip your circuit breaker and you not even realize it. If it has been tripped, flip it back on and see if that solves the issue.

Align the sensors

Most garage doors have a set of two sensors located at the foot of either side of the garage door. These are in place to ensure the door can’t close when something breaks the beam, effectively preventing personal injury and property damage.

Over time, these sensors may fall out of alignment, which in turn could result in what seems like a broken garage door. If this is the case, you will need to align the garage door sensors so they point directly at each other.

If you try this but the garage door still doesn’t work, you may need

Related: How to Tell if Garage Door Sensor is Bad

Clean the photo-eye

The photo-eye on your garage door is a safety precaution that won’t allow the door to close fully if something is blocking it. It does this by shooting a beam across the bottom of the door. If the beam is interrupted, then it senses something is there and won’t work. Check to see if there’s any dirt on the photo-eye, as this is often enough to stop it from working. Also, check to see that the wiring hasn’t been damaged, as this can sometimes happen with a leak in the building.

Look at the springs

The springs on your garage door are a vital component of the opening mechanism. They give the door the tension it needs to open, every time you need it to. Those springs do wear out over time, meaning that they lose their tension. In some cases, they’ll even break. If you can’t get the door open, take a look at the springs. Are they looking loose and worn out, or have they broken? You can replace springs yourself, but it’s a dangerous job. It’s highly recommended that you call an expert to take care of this for you.

See if the door is locked

When you use a garage door opener, it should lock the door against anyone who doesn’t have the right remote control to open it. As an additional security measure, you can also lock the manually too. This is a good idea if you’re going to be away for any period of time. If you can’t get the door open, use the key and check to see if it has been locked.

Reset your remote

One good test to do is to try opening the door with the control panel in your garage. If the door will open with this but not the remote, then it’s the remote that’s causing the issue. You can check the batteries to see if they’re dead, but if it’s not working with new batteries then the remote will need resetting. This isn’t too difficult to do. You can find the instructions for this in your manual, and reset the remote to make it work with your opener again.

If the remote doesn’t work with new batteries or after resetting, you may need to consider purchasing a new one from your local garage door service provider. There is a wide variety of garage door remotes available today, so it may be overwhelming. It’s best to stick with the same brand as your garage door opener, such as LiftMaster, and contact a professional for help programming your garage door remote.

Put the door back on the tracks

Sometimes, a garage door can be knocked off the tracks, which means it won’t be able to open. If that’s the case, you may be able to fix the problem yourself. To do this, you’ll need to pull the door open by hand and manoeuvring the door back onto the tracks. You’ll need at least two people to do this properly. If the damage is too great, you’ll need to call an expert to repair those tracks for you.

Adjust the limit setting

This is something you’ll need to do if you find the door closes, and pops open again right away. In the settings of the opener, it believes the door has hit an obstacle when it, in fact, has just touched the ground. In this case, the limit setting is too high and so will need adjusting. Again, you can change this by checking your manual. The limit setting knob is usually located on the control panel itself. Adjust the knob in small increments, until you have the door opening and closing as it should.

Conclusion

Now that you know how to replace battery in overhead garage door opener, you can effectively replace the batteries and get your garage door opener back up and running.

 There are all kinds of reasons why your garage door won’t open, but many of them very simple to fix. Firstly you’ll want to check your batteries. If that doesn’t fix it, do a quick check of your door, looking for issues such as broken springs or dirty photo eyes. You’ll soon be able to fix the problem.

Categories
Garage Door Openers

Types Of Commercial Garage Door Openers

If you run or manage a business with a garage, you may be interested in the different types of commercial garage door openers.

Commercial garage doors are designed to provide the strength and reliability you need to keep your business running smoothly. In this article, we will take a closer look at some of the types of commercial garage door openers so you know what to expect during your search.

Types Of Commercial Garage Door Openers

For your place of business, you’ll find it easier to have an opener for your garage door, rather than operating by hand. Having that automatic opener saves time and effort that can be going into other endeavors at your business. There are several types of commercial garage door openers though, so which one should you choose? Here’s a guide to help you find the right one for your premises and needs.

Here are a few types of commercial garage doors openers to consider:

  • Lightweight
  • Mediumweight
  • Heavyweight

Let’s take a closer look.

Commercial Garage Door Openers

The type of garage door opener you select will depend on how often your garage door is used. They’re separated into types dependent on use, so you’ll need to choose from one of the following:

  • Light use: If you only use your garage door once or twice a day, then this will be the garage door opener for you. It’s ideal for staff parking garages or storage areas that aren’t in heavy use. Light use garage door openers are best used with garage doors that are 14 feet high at the maximum.
  • Medium use: This is the option you’ll go for if you use your garage door more frequently during the day, say if the staff is driving in and out, or you’re fetching stock out of storage. They’re able to take more strain and frequent use, so consider these if you’re using your garage door more than a couple of times a day.
  • Heavy use: This is the opener you’re looking for if your garage is in constant use throughout the day. If you operate your garage door opener often, then you need a garage door opener that’s designed to take on heavier duty work. They’re also able to lift heavier doors, so you can use them on larger doors that allow trucks and similar vehicles in and out.

Selecting the Best Fit for Your Garage

Now you know what’s available, you’ll need to pick the garage door opener that’s right for your business. You’ll need to keep several factors in mind, including the following:

  • Security: This is the biggest aspect to think about. Will the opener you’re choosing be able to keep your building secure? How does it lock? How will people be able to get in or out? The more secure it is, the better. This is especially true if you’re storing valuable items, such as stock, behind the door.
  • Opener type: Once you know which type of opener you want, you’ll need to decide how you want it to be opened. Do you want to use a keypad or a remote opener? This will very much depend on the amount of staff you have, who will be using the door, and how often it will be used. An experienced garage door opener technician will be able to provide garage door remote programming to fit your needs.
  • The size of your garage door: The size of the door you have will affect which opener you buy. If you have smaller garage doors, then you’ll find that a lightweight garage door opener should suffice. If you have larger doors, then you’ll find you need heavyweight garage door openers.
  • The number of garage doors you have: This affects your choice as well. If there are multiple doors on your property, then will you need to use them all every day? If not, then lightweight door openers should suffice. If you only have one door that’s going through many opening cycles every day, then a heavy use door opener is going to be what you need.

Why Use An Automated Garage Door Opener?

There are several reasons why you should look into a garage door opener for your business. They provide all kinds of benefits, including the following:

    • Ease of use: Firstly, it’s much easier to use a garage door if you have an automated system opening it. Your garage doors are likely to be bigger and heavier than a residential model, so you want to have something that will help you get that garage door open.
    • Save time: This is especially true if the garage door is in use all the time. No one wants to be getting out of their vehicle to open the door, driving in, and closing the door again multiple times a day. It costs so much time, and when you’re on a deadline it’s the last thing you need. Instead, a garage door opener does it for you, and even shuts the door behind you when you’ve driven in.
    • Security: Security is vital, no matter what your business does. The last thing you want to do is leave a chink in your property’s armor. Having a garage door opener means that no one can get in unless they’ve been approved by you.
    • Peace of mind: As a business owner you’ve always got so much on your mind. You’re spinning so many plates, you can’t remember everything. When you finish for the day, you won’t need to worry about remembering to lock the garage doors. Once someone has driven through the door, it’ll close and lock itself until the next time a driver with the right remote or keycode comes along. It’s great to have one less thing to worry about.

Security And Your Garage Door

For every business, security is a priority. It’s been mentioned several times in this guide already, but it’s important to think about how exactly you’ll keep that garage door secure.

When it comes to openers, you’ll have your choice as to how you open them. Remotes are a good idea, as you can only hand them out to people who will need them. If you have commercial vehicles, then they’ll stay in the vehicles, making them even more secure. Most modern remotes use rolling codes, making sure that no one can enter without your say so. A keypad is also good if you have lots of people coming in and out. Change the code regularly and your business will be secure.

Conclusion

Now that you’re more familiar with the types of commercial garage door openers available, you can shop for the right fit for your garage.

You have your choice of garage door opener, so make sure you pick the one that suits your business best. It needs to stand up to the use you’ll put it through, as well as keeping your premises secure at all times.

As always, if you need help deciding which garage door opener is right for your business, make us your garage door guys today.

Categories
Garage Door Openers

Automatic Garage Door Opener Runs but Door Doesn’t Move

We work with a lot of homeowners who aren’t sure what’s wrong with their garage door. One of the most common problems we hear involves the garage door opener – the automatic garage door opener runs but door doesn’t move.

There are a couple of reasons why this might occur, so we thought we would explore them below in case you’re experiencing this problem.

Let’s take a closer look …

Automatic Garage Door Opener Runs but Door Doesn’t Move

Sometimes, homeowners will find that their automatic garage door opener runs but the door doesn’t move. They can hear the motor going, but the door itself is not opening. This is frustrating, especially if you’re trying to get your car out of the garage. You can troubleshoot the problem yourself though, so here’s what to do if the garage door opener isn’t doing its job.

Use The Emergency Release

The very first thing you need to do is find the emergency release and disengage it. If you’re not sure where yours is, take a look at your manual for your garage door opener, as this should have the answer for you. When you release the door, you’ll enable yourself to use it manually. Please note that you should not do this unless the door is already fully closed, for safety reasons.

Now, you’ll want to try and open the door manually. This is to check whether the issue lies with the garage door itself, or the garage door opener. If you can open the door, then the door is not at fault. Instead, you’ll need to investigate the garage door opener. If the door won’t open, then it’s the door itself which is causing the problem.

Related: How to Open a Garage Door with a Broken Spring

If it is the door, there are several reasons why it won’t open:

  • Firstly, check that the garage door isn’t locked. It sounds very obvious, but when you’re in a rush and trying to leave the house, it’s amazing how quickly you forget about this.
  • Check that nothing has fallen into the garage door track. If it has, remove it and try opening the door again. This may have been what was stopping the door from opening.
  • Take a look at your garage door springs. These are what gives your garage door the tension needed to open. If they’ve broken, then that will be why the door won’t open. Be aware though, if they are broken it’s best not to fix them yourself. Springs hold a tremendous amount of tension, so it’s best to contact a trained professional if repair is needed.
  • Check pulleys and cables, to ensure that they haven’t snapped or become loose. If you see anything that doesn’t look quite right, again, call in a repair expert to handle it for you.

Once you’ve made these checks, make sure that you’re reconnecting the emergency release to keep your garage door safe. Check the manual for your door opener to ensure you connect it properly.

Why Your Door Isn’t Opening

So you’ve made all these checks, but it’s not your garage door that’s causing the problems. There’s something wrong with the garage door opener, that’s stopping it from opening the door for you.

In most cases, the cause will be a stripped gear or a chain that has come off the sprocket. If this is the case, the motor will run but as the chain isn’t where it should be, it can’t generate the lift to open the door.

You will find many guides on how to fix the garage door opener online, but it’s up to you whether you want to attempt the repair yourself. As mentioned earlier, your garage door opener can be dangerous if you’re not properly informed on what you’re doing to fix it. If you’re at all unsure about what’s happening, talk to a repair expert to fix it for you.

You may also find that your motor won’t work as the emergency release has become jammed. This will happen if the chain or belt moves, but the door won’t open. As the release is stuck, it can’t allow the door to open. Again, you’ll need an expert to come and put this right.

How To Stop The Problem Happening In The Future

Now that the garage door opener has been fixed, you need to ensure that the same problem won’t crop up again in the future. The way to do this is to perform regular checks on your garage door opener to ensure that it’s in top condition.

When you’re checking your garage door, ensure that everything is in place. You want to ensure that everything is in the right position and able to move when it needs to move. Now’s the time to lubricate all moving parts to enable them to move smoothly when needed.

Check the tracks of the door to ensure nothing has fallen in. Clean them out to ensure that the door can run freely up and down the tracks without problem.

You’ll also need to take a look at the photo eyes on your garage door. These are there to ensure that nothing is in the path of the door when it’s opening and closing. If they’re dirty, or something is blocking it, then they won’t work as they should. A good way of testing them is to put a block of wood in the way of the door, and then attempt to close it. If the door doesn’t reverse back before it hits the wood, then you’ll need to clean the eyes. If that doesn’t fix the problem, take a look at the auto reverse function. It may need adjustment in order to function properly.

It’s also a good idea at this point to look at the garage door itself at this point. Over time, they can take dents and scratches from the elements, and from anyone bumping into the door itself. If there are dents in the door they need to be dealt with, as they will affect the way the door opens. If you have a dent use a block of wood against it, and use a hammer against the wood to hammer that dent out.

If the motor is running on your garage door opener, but the door itself isn’t opening, don’t panic. There’s usually a simple explanation for it so follow the steps here to solve the problem. Soon, the door will be opening again smoothly.

Categories
Garage Door Openers

How To Adjust Garage Door Opener

If you discover your garage door isn’t opening, closing, or otherwise operating properly, it might need an adjustment to ensure its properly aligned.

This is one of the leading causes of garage door problems, so we thought it might be helpful to provide a step-by-step guide to adjusting your garage door opener. Here’s how to adjust a garage door opener …

Why You Need To Adjust Your Garage Door

If your garage door isn’t working as it should, the tempting thing to do is to ignore it. Many homeowners feel as though attempting to fix their garage door opener is difficult, and so they don’t deal with it. However, there are reasons why you shouldn’t leave it until the last minute.

  • Security: The biggest reason why you shouldn’t leave your garage door unadjusted is the security of your home. When the opener is working properly, you’ll find that your home is totally secure. no one can get into your home unless they have an opener for the door. If the door isn’t shutting properly, or you’re having issues with the opener, then that door isn’t secure anymore. Somebody could take advantage of the gap in order to get in, which is the last thing you want.
  • Pests: No matter how careful you are, pests can get into your home and make a serious nuisance of themselves. What’s worse, they’ll actually cause damage to your home and rack up more repair bills. You’ve got to protect yourself from them any way you can, and that includes repairing your garage door opener. A slightly open garage door is an open invitation to any pests in the vicinity, looking for somewhere warm and safe to call home.
  • Safety: Finally, you need to adjust your garage door to keep you and yours safe. When a garage door opener isn’t adjusted properly, it may not be able to register whether anything is in the way. If this is the case, then it may not stop even if something is blocking its path. At best, this means your car will get a nasty dent, and at worst, you or your children or pets could be injured. Adjust the door opener as soon as there’s a problem to stop this happening.

How To Adjust Garage Door Opener

Luckily, it’s much easier than you’d think to adjust your garage door opener. There are three different aspects to your garage door that you can adjust:

  1. Limit: How far your garage door opens and shuts.
  2. Force: How much force is used to open and close the door.
  3. Safety reverse: The safety feature that stops the door if something is in its path.

To adjust your door properly, you’ll need to adjust all three of these aspects of its opening. You’ll see on your garage door opener that there are screws in place to help you make adjustments. Get a ladder and get closer to the opener so you can adjust it as needed, and have a helper to help you see if your changes are working.

First, you’ll want to look at the limit. If the door isn’t shutting all the way, then the limit will need to be changed. You’ll see there’s a screw on the opener that’s labeled ‘limit’, or something similar. If you can’t find it, then consult your manual so you can locate it. First, try turning the screw one-quarter of a turn, and then try shutting the garage door. In most cases, this will be enough to shut the door properly. If it doesn’t, try it again until the door shuts.

Next, you’ll need to adjust the force. You’ll need to address this is your door isn’t opening up all the way. Firstly, check to see if there’s anything blocking the sensors at either side of the door. If there is, clear it away and try opening the door again. If this doesn’t work, then you can adjust the force in a similar manner to the limit, to ensure it’s putting enough force behind the door to open it up.

Finally, it’s time to test the safety reverse. Find a block of wood and leave it in the path of the garage door, and then try closing it. If the safety reverse is working properly, then you’ll find the door will open back up without hitting the wood. If it does hit the wood, then you need to adjust the reverse. This is done by adjusting the limit screw. Read your manual to see how you’ll do this with your model of garage door opener.

Calling In The Experts

In most cases, making these adjustments will be enough to get your garage door opener working again, as it should. Follow your manual and these steps to adjust it until the door opens and closes correctly. If you’re having trouble with it though, don’t despair. A garage door professional is your best bet, to ensure that the door will be working again in no time.

Calling in a repair engineer is a good idea if you’re not too sure about how your opener works, too. Garage doors don’t look too dangerous, but if you’re adjusting them and you’re not sure about what you’re doing, it could lead to injury. It’s not common, but it can happen. If you’re ever unsure, ask an expert to take a look at it for you.

Many issues with the opener can be handled with some adjustment, so it’s a good idea to try it before you look into pricier options. Follow these tips and you’ll have the garage door opener working again in no time at all.

Photo by Jack Douglas

Categories
Garage Door Openers

How To Program A Garage Door Opener

Most garage doors are equipped with a garage door opener, which eliminates the need to open and close the door manually. Garage door openers are programmed to respond to a wireless signal from one or more remotes.

Whether you just purchased a new garage door opener or a new remote, you will need to know how to program your opener so you can operate your garage door effortless.

We hear from a lot of homeowners who need help programming their opener, so we thought we might be able to provide some helpful instruction.

Here’s how to program a garage door opener …

How Your Garage Door Opener Works

The way your garage door opener works will depend on how old it is. Older models use code switches. These switches in your remote will be set to ‘on’ or ‘off’, in a unique pattern. The same set of switches will be found in the garage door opener, meaning the two will recognize each other and the door will open when you bring them into contact.

Newer models use something called ‘rolling codes‘. This is a digital system, where the code to open the door changes every time you use it. This is a security measure, ensuring that no one can use a similar remote to open your door, as they still won’t have the right code.

Garage door openers use radio frequencies to communicate. Most commonly, these are around 300 MHz – 390 MHz. If you want to know what frequency your opener uses, you’ll find it’s printed somewhere on the device.

How To Program A Garage Door Opener

If you’re wondering how to program a garage door opener, it’s often much more simple than you’d think. Here’s how you’ll program your opener to match with your remote and open your garage door when you get home at the end of the day.

Step one: You’ll need to locate a new remote that will work with your garage door opener. If you already have the remote that came with the system, then you can just use that. If you don’t, then it’s best to buy a remote that’s from the same manufacturer as your opener.

Step two: You’ll need to clear any old garage door codes that are on your remote. How you do this will depend on the model of remote you have, so consult the instructions to see how to do it.

Step three: Now, you need to find the ‘learn’ button on your remote. This could be under a panel in your remote, so read your instructions if you’re not able to find it.  Outside your garage, hold it down until the LED light on your remote blinks. Once this is happening, press the open button once, to see if the garage door opens. This should be enough to program your garage door opener into your new remote.

As you can see, it really is very simple to program that garage door opener. If you have an older model, you’ll need to set the switches so they match in both opener and remote. If this is the case though, you may be better off getting a newer garage door opener. They’re a lot more secure and will stop anyone not authorized from getting into your garage.

Troubleshooting

Are you finding that you can’t get your garage door opener to recognize your remote? Don’t worry, here are some tips to help you get it working again.

  • Unplug your garage door opener for a moment, then plug it back in and try again. This works in very much the same way as rebooting your PC or phone. This should clear the system and allow it to be reprogrammed.
  • Ensure that you’re close enough to the garage door opener that it can receive the signal from the remote. If you’re too far away, it can’t read it and so the door will not open.
  • Replace the battery in the remote. It sounds simple, but it’s so simple that people forget that this could be a problem. Take the old batteries out, polish the contacts if needed, and place in fresh batteries to see if this works.
  • Check the neighbor’s garage door frequency. If you find you’re pressing the button and nothing is happening, it could be that your remote is actually opening your neighbor’s door instead. This happens when you and your neighbors have garage door openers that are on the same frequency. Talk to your neighbors and ask them if their garage door is going haywire. If this is happening, you can reprogram your door to work on a different frequency. Check your manual to see how to do it.
  • Check your garage door springs. If the remote won’t open the door, it may not be the fault of your garage door opener at all. Your garage door springs are what do the heavy lifting when you open the door. When they break, your door won’t be able to open. You’ll see right away if they’re broken, so get them replaced and you should have your functionality back.

A Word On Security

When programming your garage door opener, remember that the opener is one of your first lines of defense for your home. You want to ensure that only the right people are able to access your garage. Think about it like handing out your house keys. You wouldn’t give a set to just anyone, would you? It’s the same with your garage door remotes. Only give a programmed remote to those who you want to have access to your home.

If you have an older system, now’s the time to look at a replacement, too. There’s a good reason why the industry has switched over to rolling codes. With an old system, anyone could replicate the code the opener accepts, gaining access to your home. Upgrade to a new opener and make your home more secure.

Conclusion

Now that you know how to program a garage door opener, you can rest assured your garage door will respond to the remote in your garage as well as the remote in your vehicles.

If, however, you run into trouble when programming your garage door opener, you can always give your local garage door service provider a call for help.

Categories
Garage Door Openers

How To Install A Garage Door Opener (12 Steps)

A garage door opener is something that once you install it, you won’t know how you lived without it. They’re helpful, easy to use, and will save you so much time.

Here’s how to install a garage door opener and make the most of it once you have it.

Overview

In this article, we’re going to share some tips to keep in mind before you start your project, including everything from how to install a garage door opener and programming to troubleshoot common problems and deciding if you need to contact a professional for help.

Let’s get started.

How To Install A Garage Door Opener

Installing your own garage door opener shouldn’t be too difficult, and should take you around 4-6 hours to do. Here are the steps you’ll need to take to get it installed.

1. Checking compatibility

Most modern garage doors will easily be used with a garage door opener, thanks to the multiple horizontal sections it has. If you have an older door that’s in one solid piece, then you’ll need to replace your door first.

Garage door replacement costs will vary based on the type of door and materials. However, a recent study revealed homeowners recouped 123.8% of the cost. If you’d like to learn more, check out out these new garage doors.

2. Select a garage door opener

You’ll see that there’s lots of choice on the market when it comes to your garage door opener.

The choice boils down to two different types of models, including chain-driven or belt-driven. The main difference is that the belt opener is somewhat quieter in operation, so keep that in mind when you’re considering one.

3. Ensure there’s an electrical outlet

You’ll need to power your opener, and so there needs to be an outlet in the immediate area for it to be plugged into. Usually, this will be on the ceiling. You may already have one, but if you don’t, you’ll need to have one installed.

4. Put together the main assembly

Your garage door opener should come with instructions on how to put it together. Put together your main assembly now, ready to be installed on the ceiling.

5. Install blocking

If there’s no blocking on the ceiling already, you’ll need to install it now, ready for the main assembly. Your instructions will tell you exactly how they should be installed. Remember, drill them into the joists in your ceiling, not just the sheetrock, or it won’t have enough support.

6. Attach the bracket to the garage door

This is what will connect the garage door to the opener itself. Check your instructions to see exactly where this needed to go on your door.

7. Put everything into place

Now, you’ll need to insert the end of the assembly into the bracket on the door, then mount the opener onto the mounts in the ceiling. Again, refer to your instruction manual as every garage door opener is slightly different.

8. Attach the safety rope

This needs to go on the emergency release on the carriage. Adjust the rope so any adult can reach it, but keep it out of the reach of children for their safety.

9. Insert the light bulb

Many openers have a light bulb compartment, so you’ll have light when you open your garage door. Use a light bulb that’s designed for ‘rough’ use, as it will need to stand up to the vibrations of the garage door.

10. Install the electric eye equipment

This safety equipment should go either side of the garage door, to sense if anything is obstructing the path of the door. Refer to your instructions for how to install yours.

11. Adjust your safety autoreverse and electric eye systems

This is a vital step to ensure you’re safe when using your garage door. Again, check your instructions as they’ll tell you how to do this.

12. Test the door opener

Now, check to see that your garage door opener is functioning correctly. Hit the remote button or use the keypad to see if it’s all opening correctly.

Programming

After installing your garage door opener, it’s time to program it so it opens and closes properly.

We recommend following the instructions included with your garage door opener in order to avoid overlooking critical steps. If you don’t have the instructions, you can find helpful information from the company that made the opener.

If you run into a problem while programming, consider taking a look at the troubleshooting section of How to Program a Garage Door Opener.

Troubleshooting Problems

Most installations should go smoothly, but sometimes you’ll run into problems installing the garage door opener. If that happens, don’t panic. When you’re stuck, get in touch with a garage door repair company. They’ve installed many openers over the years, so they know just what they’re doing. It’s much better to call on them and have them complete the installation for you, rather than trying to finish it yourself.

It’s easier than you’d think to install a garage door opener if you follow these instructions. It’s all about picking the opener that’s right for you and following the instructions that come from the manufacturer. You’ll soon be able to enjoy all the benefits of a garage door opener in your home.

Why Install A Garage Door Opener?

There are so many reasons why you would want to install a new garage door opener in your garage. Firstly, they offer a huge amount of convenience. When you pull up to your garage door, you don’t have to get out of your car in order to get in. You’ll either push the button on your remote or punch in a number on a keypad, and the door will open for you. All you have to do is drive-in. No more getting out of your car in bad weather to open the door, or trying to wrangle the kids or pets that are in your car when you’re trying to open the door at the same time.

When you drive in, the door will close and lock automatically behind you. Ever worried about whether you remembered to lock the door? You won’t have to do that anymore. as it’s automatic, you can leave it as you know it’ll be locked until you come to open it again.

Also, having a garage door opener on your door gives you extra security for your home. No one can enter your garage unless they have a remote or the code for the keypad, and they won’t have that unless you give it to them. Modern remotes use ‘rolling codes’, where the opener changes the ‘code’ it’s looking for from the remote every time it opens. This keeps you safe as even if someone has a remote for your model of garage door opener, they won’t be able to get in.

Get an Estimate

If installing a garage door opener seems beyond your personal experience, you may find it helpful to contact a professional for help. A professional will be able to provide an estimate so you know how long it will take and how much it will cost.

Here at Your Garage Door Guys, we’re proud to help neighbors throughout our service areas with a variety of garage door services, including garage door opener installation.

Conclusion

Now that you know how to install a garage door opener, you can decide whether or not you have the experience to get the job done. If you need help installing a garage door opener, consider contacting Your Garage Door Guys to speak with a friendly member of our team and request an estimate.

Thanks for reading.

Categories
Garage Door Openers

How to Tell if Garage Door Sensor is Bad (5 Things to Check)

If your garage door isn’t closing properly and there doesn’t seem to be anything tripping the sensor, you need to understand how to tell if garage door sensor is bad.

In this article, you will discover some of the most common issues that cause a garage door sensor malfunction.

Let’s get started …

How to Tell if Garage Door Sensor is Bad

It’s not always clear if a garage door sensor is bad, but there are a few common signs that indicate you have a malfunction.

Let’s start with the most obvious sign – your garage door doesn’t close properly. If you discover this problem, the sensor path is the first thing you should check, as any objects blocking the path will prevent the door from closing. This is a common garage door safety feature that prevents injury and damage to personal belongings. Other signs include flashing garage door opener lights, missing sensor light, or flashing sensor lights.

Okay, now that you know some of the common signs of garage door sensor malfunction, you’re ready for the next step – troubleshooting.

Here’s how to tell if garage door sensor is bad – five things to check:

  1. Sensor path
  2. Sensor power
  3. Sensor lenses
  4. Sensor moisture
  5. Sensor alignment
  6. Sensor wear & tear

Keep reading for more detail, starting with the first thing you should check.

1. Sensor path – Make sure nothing is obstructing the sensor beam

In general, garage door sensors block the door from closing if there is an object nearby.

This precaution ensures that the door doesn’t close when your car is in the doorway. The same mechanism kicks in when other objects are placed near the door too.

2. Sensor power – Reconnect the sensor to its power supply

A common cause of a malfunctioning garage door sensor is lack of power supply. Look for small LED lights on the sensors. If they’re turned on in both the sensors, then there is no issue with the power supply. If you find the lights turned off in one or both the sensors, it indicates that there is a problem in power supply.

3. Sensor lenses – Give sensor lenses a good cleaning

Sometimes, door sensor lenses can be covered in dirt. This happens when you don’t clean the lenses often, if you live close to an intersection or if there’s a lot of wind and pollution near your home. All this leads to the pile-up of dust on your lenses and it is likely to block the sensor from functioning properly.

4. Sensor moisture – Dry sensors if wet

Sometimes, wetness in and around the sensors is a possible cause of the malfunction. This is likely if your sensor was exposed to rain or water from the sprinkler system.

5. Sensor alignment – Make sure both sensors line up with each other

When both the sensors are misaligned, they will not work properly. Check if this is the cause by looking at the LED lights on both the sensors. You should use green lights, if this is not the cause. When you see red lights flashing one, or lights off in another, check for the alignment.

6. Sensor wear & tear – Check for damage

Sometimes, the problem can be due to normal wear and tear. This is especially true if you’ve been using the same sensor for more than ten years.

Now that we’ve seen the possible causes, let’s see how to troubleshoot them.

Related: 4 Common Garage Door Problems

Troubleshooting

Here are some simple troubleshooting options that should fix the problem for you.

  • Check if there are any objects impeding the door. Sweep the garage floors and look through the sidings to ensure that there are no objects to obstruct the door.
  • Since the lack of power supply is a common problem, check the wires around the sensor when the LED lights are not flashing. Many times, the malfunction can be due to a loose connection or broken wire. A good way to check for power connection is to check if other parts of the garage are getting power. This makes it easy for you to isolate the problem. If the cause is a poor power connection, open the box and check for connections, but make you exercise extra precaution. If you’re not sure where to get started, a professional can help. Get a 25-point garage door inspection to ensure your garage door is safe and working properly.
  • Even if there are no evident signs of dust on your sensor’s lenses, it is still a good idea to wipe the lenses down with a dry, clean and lint-free cloth.
  • Check if the alignment is proper, and adjust as needed to make sure they are both facing each other.
  • Sometimes, wet patches around the sensors are the cause of the malfunction. If you notice any wetness, do nothing. Just allow the wetness to dry up and try opening your garage door. It should work now.

If none of these troubleshooting options work, look at the garage door sensor’s manual and see if there is anything in it that can help you to fix the issue.

Your final option is to get in touch with a garage door expert to fix the problem for you. Sometimes, the sensor may be beyond repair due to wear and tear, and in such a case, your best bet is to replace the garage door sensor with a new one.

The latest garage door sensors are technologically advanced and even allow you to control the opening and closing through an app on your smartphone. This is something to consider if you decide to replace your garage door sensor.

Conclusion

Garage door sensors are an essential part of your garage and any malfunction can impact your safety in a big way.

If you’re unable to resolve the problem, you may need to contact a professional garage door service near you for help. If you’re in the Ventura County or Los Angeles County area, contact Your Garage Door Guys for an estimate. One of our friendly professionals will visit you at your convenience and assess the problem.

Categories
Garage Door Openers

7 Reasons Your Garage Door Opens By Itself

There are a few common reasons a garage door opens by itself, including everything from an issue with the wiring to a neighbor who has the same opener code as you.

In this article, you will discover 7 common reasons to consider.

So, Your Garage Door Opens By Itself

Before we get into the reasons a garage door opens by itself (usually), we just want to take a moment to stress the importance of resolve the matter quickly.

The garage door is probably the largest opening to your house, which burglars can use to gain access to your vehicles, backyard, and, more importantly, the inside of your home. For this reason, it’s important to address the problem sooner than later.

Take action and call a professional garage door service for help.

Now, let’s take a closer look at some of the reasons this problem may be occurring …

7 Possible Reasons

There are several reasons why the garage door may be opening without you knowing. Here are a few of the most common reasons why:

1. Your neighbors have the same garage door opener code

This doesn’t happen too often, but if your door is opening on its own, it’s worth checking. In some instances, your door will be opening as its set to the same wireless code as your neighbor’s garage door. All you have to do is ask your neighbor to open their garage door and see if your door starts opening too. If it does, you’ll just need to change your door’s code. The instructions to do this should be in your garage door manual, and it will be fairly simple to do.

2. There’s radio interference

As your automatic garage door opener works on a wireless signal, you may find that radio signals may be affecting it. CB radios, police radios, radio stations or radio towers can all interfere with your garage door, making it open and close. You may need to call in a garage door technician to identify the issue and correct it for you.

3. The remote control is defective

The issue may be down to the remote control to your garage door. If the remote is defective, or the batteries are wearing down, then it may start sending out random signals, including the one to open and close the door. Change out the batteries to see if that resolves the issue. If it doesn’t, you can buy a new remote to see if that will help. It’s a fairly inexpensive fix, so it’s worth trying out if you’re not sure what’s causing this problem for you.

4. The safety sensors are blocked

Most automatic garage doors have an auto-reverse feature, which is designed with your safety in mind. If anything is in the path of the door, then the door will open back up to avoid hitting it. This stops the door damaging your car, or touching animals or children that may be in the way. These sensors are affected if there’s something blocking them, or if they’re damaged. The smallest thing can cause them to become blocked, such as snow, leaves, or even dirt. Take a look at your sensors, and clean them if they need cleaning. This could solve the issue of the door opening and closing by itself.

5. The door opener button is stuck

If you have a door opener button outside of the garage, it could just be that the button is stuck. Dirt and debris can get in the button, causing it to stick down and continually open and close the door. Take a look at your door button, and see if it’s stuck down. If it is, a simple cleaning is all that’s needed to solve the issue.

6. There’s a short circuit in the circuit board

This is one of the more likely reasons your garage door is opening and closing by itself. If the door is doing this and there’s no obvious cause, then you may want to get the circuit board looked at. Call a technician who’ll be able to examine it, and make any repairs that are necessary.

7. There are issues with the wiring

Is the wiring for your garage door exposed? If so, this could be the problem. A bare spot on your circuit board can brush up against any other metal part of your door, activating it and causing the door to open. A simple repair to the board or wire will solve this. If you’re not sure how to do it yourself, then call in a garage door company and they’ll take care of it for you.

DIY Or Professional Repair?

Now you know there’s a problem with your garage door, what are going to do in order to get it fixed? Are you going to try a DIY repair or are you going to call in the experts? The answer depends on what issue is causing your door to malfunction. If it’s a simple issue, such as the door button being stuck or the remote developing a fault, then you can take care of them yourself with little difficulty.

If the problem is bigger than you were expecting, then you’ll want to call in an expert to take a look at it for you. Garage doors are dangerous when they’re not handled correctly, so you don’t want to take any chances when they need repair.

Maintain Your Garage Door

To avoid this problem happening in the future, it’s a good idea to maintain your garage door regularly. Keeping a close eye on the door means you can catch the problem before it becomes any worse.

Use an online maintenance guide to help you keep your garage door in top shape. You’ll be able to spot problems before they become any worse.

A garage door opening and closing on its own is a rare problem, but it does happen. If you’re finding your garage door is doing this, go through the checklist and see what’s causing it. In most cases, you’ll be able to handle it by yourself. Get the door fixed quickly, to ensure that your home is safe.

Exit mobile version